Southeastern Hose, Inc.
24 Hour Customer Service
All Categories > PTFE Hose & Connectors > Smooth Bore PTFE Hose > S-TW Series Smooth Bore PTFE Hose > Part Number S-18ZTW  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Part Number S-18ZTW, 1.00 Inch (in) Inner Diameter S-TW Series Smooth Bore PTFE Hose



S-TW Series tube is reinforced with 304 stainless steel wire and has a minimum wall thickness of 0.03". S-TW hose is available as an alternative where competitors thin wall products are specified, and S-Series cannot be substituted. The minimum bend radius is measured in inches to the inside bend. This product is also available with a static dissipating tube in our SC-TW Series.




Specifications  · Note

Specifications

Inner Diameter (in)

1.000

Outer Diameter (in)

1.24

Working Pressure (psi)

1000

Minimum Burst Pressure (psi)

4000

Minimum Bend Radius (in)

12.0

Weight (lb/ft)

0.53

Vacuum Pressure (inHg) 1

12

Material

PTFE

Minimum Wall Thickness (in)

0.03

Industry Standards/Certifications

Meets SAE 100R14A

Applications

Chemical Transfer
Compressor Discharge

Steam
1 Maximum negative pressure for -16 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are requires for -16 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected.


Note

Note

"Z" designates a double braid of 304 stainless steel wire.