Southeastern Hose, Inc.
24 Hour Customer Service
All Categories > PTFE Hose & Connectors > Smooth Bore PTFE Hose > S-TW Series Smooth Bore PTFE Hose > Part Number S-7TW  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Part Number S-7TW, 0.38 Inch (in) Inner Diameter S-TW Series Smooth Bore PTFE Hose



S-TW Series tube is reinforced with 304 stainless steel wire and has a minimum wall thickness of 0.03". S-TW hose is available as an alternative where competitors thin wall products are specified, and S-Series cannot be substituted. The minimum bend radius is measured in inches to the inside bend. This product is also available with a static dissipating tube in our SC-TW Series.





Specifications

Inner Diameter (in)

0.38

Outer Diameter (in)

0.53

Working Pressure (psi)

2000

Minimum Burst Pressure (psi)

8000

Minimum Bend Radius (in)

5.0

Weight (lb/ft)

0.11

Vacuum Pressure (inHg) 1

28

Material

PTFE

Minimum Wall Thickness (in)

0.03

Industry Standards/Certifications

Meets SAE 100R14A

Applications

Chemical Transfer
Compressor Discharge

Steam
1 Maximum negative pressure for -16 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are requires for -16 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected.